Tag "reactor2"
Sr-90 density increased over 2.5 times in groundwater beside Reactor 2
On 10/30/2015, Tepco announced the Strontium-90 density reached the highest level at one of the observation wells beside Reactor 2. The sample groundwater was collected at the observation well called
9.4 Sv/h detected outside Reactor 2 vessel
On 10/29/2015, Tepco announced they measured 9.4 Sv/h in Reactor 2. The measurement point was outside PCV 2 (Primary Containment Vessel of Reactor 2) to show the possibility that the
Groundwater Cs-134/137 density jumped up 260 percent beside Reactor 2 within only a week
Related to this article.. Sr-90 density rose up 155 percent of the previous highest reading in the seaside of Reactor 2 [URL] On 9/29/2015, Tepco announced Cesium-134/137 density of groundwater
Mass media reported Reactor 2 has almost no fuel inside / 6 months later than the first academic report
Following up this article.. Nagoya Uni “Significantly small amount of fuel remaining in Reactor 2″ / No announcement about underground [URL] The mass media in Japan such as NHK reported
Sr-90 density rose up 155 percent of the previous highest reading in the seaside of Reactor 2
From Tepco’s report released on 9/4/2015, the density of Strontium-90 increased to 155% of the previous highest reading in the seaside of Reactor 2. It was measured in groundwater gathered
1.2 Sv/h measured on unidentified substance overflowing of Reactor 2 / Two parts concealed on Tepco’s source
Photo : The picture captured by “PackBot”. Black substance is overflowing from the lid connected to Reactor 2 vessel. The composition is not announced. The radiation level was overscale. On 6/29/2015,
A thermometer of Reactor 2 indicates 89℃ / Reaching 100℃ in 4.7 days at this rate
Following up this article.. Thermometer of Reactor 2 indicates rapid increase in temperature again / 79℃ on 5/10/2015 [URL] The temperature indicated by the thermometer is still rising at 2.3
Thermometer of Reactor 2 indicates rapid increase in temperature again / 79℃ on 5/10/2015
Following up this article.. A thermometer of Reactor 2 indicates a rapid increase of temperature / From 20℃ to 70℃ within 6 hours [URL] Tepco’s plant parameter is showing that
Spent Fuel Pool temperature rapidly dropped as PCV heated in Reactor 2
Following up this article.. A thermometer of Reactor 2 indicates a rapid increase of temperature / From 20℃ to 70℃ within 6 hours [URL] Tepco’s plant parameter shows the temperature
A thermometer of Reactor 2 indicates a rapid increase of temperature / From 20℃ to 70℃ within 6 hours
According to Tepco’s plant parameter, one of the thermometers in Reactor 2 is showing an abnormal increase of temperature. The data is published every 6 hours. The thermometer is located