Tag "reactor2"
Nagoya Uni “Significantly small amount of fuel remaining in Reactor 2” / No announcement about underground
Related to this article.. IRID SAW no fuel or water remaining in reactor core of Reactor 1 [URL] On 3/20/2015, Nagoya University announced they SAW the remaining nuclear fuel in
Highest density of Cs-134/137 detected at 2 locations of Reactor 2 seaside / 4 × the previous highest reading
On 3/16/2015, Tepco announced they measured the highest density of Cs-134/137 at 2 boring wells located in Reactor 2 seaside. The sampling date was 3/16/2015. The readings were 303,000 Bq/m3
Tepco trying to stop 30,000,000 Bq/m3 of Cs-134/137 water with sandbag and blue sheeting
Following up this article.. 29,400,000 Bq/m3 of Cs-134/137 from water on the roof of Reactor 2 / kept flowing to the Pacific for 4 years [URL] At this moment,
29,400,000 Bq/m3 of Cs-134/137 from water on the roof of Reactor 2 / kept flowing to the Pacific for 4 years
Tepco has been concealing the extremely highly contaminated water flowing to the Pacific for 4 years. They admitted it on 2/24/2015. It is the water flowing in the drain beside
590,000,000 Bq/m3 of Strontium-90 measured from groundwater of Reactor 2 seaside
Related to this article.. 31,000,000 Bq/m3 of Strontium-90 measured at the nearest boring well to Reactor 2 [URL] Still high density of Strontium-90 is detected from groundwater of Reactor
31,000,000 Bq/m3 of Strontium-90 measured at the nearest boring well to Reactor 2
On 1/27/2015, Tepco announced they measured high density of Strontium-90 from groundwater in the seaside of Reactor 2. It was 31,000,000 Bq/m3. The sampling point was the boring well, which
Radioactive contamination level jumped over 57 times outside of underground wall
Cs-134/137 and all β nuclides (including Sr-90) density showed the rapid increase in groundwater, according to Tepco. The sample was taken in the seaside of Reactor 2. Sampling date was
Tepco to start “scanning” inside of Reactor 1 in early February by using muon
Photo : A sample image of muon scanning method inside of a nuclear reactor. On 12/25/2014, Tepco announced they are going to scan inside of Reactor 1 ~ 3
Tepco failed in shutting up retained water even with cement / Water level becomes back only within 2.5 hours
Photo : Injecting cement and grout to underground trench. Taken on 11/25/2014. Following up this article.. Retained water underground temperature went up by 10℃ near Reactor 2 / Tepco
Groundwater level still keeps going up in seaside of Reactor 2
Following up this article .. Groundwater coming up in seaside of Reactor 2 again / Overflowing up-ground around 18th December [URL] The groundwater level still keeps increasing as it