Tag "temperature"
A thermometer of Reactor 2 indicates 89℃ / Reaching 100℃ in 4.7 days at this rate
Following up this article.. Thermometer of Reactor 2 indicates rapid increase in temperature again / 79℃ on 5/10/2015 [URL] The temperature indicated by the thermometer is still rising at 2.3
Thermometer of Reactor 2 indicates rapid increase in temperature again / 79℃ on 5/10/2015
Following up this article.. A thermometer of Reactor 2 indicates a rapid increase of temperature / From 20℃ to 70℃ within 6 hours [URL] Tepco’s plant parameter is showing that
Spent Fuel Pool temperature rapidly dropped as PCV heated in Reactor 2
Following up this article.. A thermometer of Reactor 2 indicates a rapid increase of temperature / From 20℃ to 70℃ within 6 hours [URL] Tepco’s plant parameter shows the temperature
A thermometer of Reactor 2 indicates a rapid increase of temperature / From 20℃ to 70℃ within 6 hours
According to Tepco’s plant parameter, one of the thermometers in Reactor 2 is showing an abnormal increase of temperature. The data is published every 6 hours. The thermometer is located
Reactor 5 pool coolant system won’t get back on until August
Photo : The leaking hole is currently covered with the hardening agent and a piece of wood is put on tied by some belt. [URL] Following up this article..
Reactor 5 temperature jumped up 13 ℃ while losing coolant system only for 2 days
Graph : Blue line shows the reactor temperature, Green line shows the SFP 5 temperature Following up this article.. Tepco no clue to reboot coolant system of Pool
[Photo] The gap of temperature around fuel assembly captured by underwater camera
Note : If you are from the international mass media, Don’t read this site before taking a contact with me. Following up this article.. [Video] First spent fuel
Tepco decreased Nitrogen gas injection to reactor1 → (26 hours later) reactor temperature rose up by 8℃
For some reason, reactor1 gets heated up once Tepco stops nitrogen gas injection. In order to purge hydrogen gas that may cause hydrogen gas explosion, Tepco is injecting nitrogen gas
Temperature abnormally rose in reactor3 pressure vessel
According to Tepco, the temperature of the bottom of reactor3 pressure vessel rose up on 9/6/2013. From their data, the temperature suddenly increased by approx. 1℃. It had been stable
Reactor6 temperature increasing after restarting coolant system, 27.6℃ → 28.0℃
Following up this article..Reactor 6 coolant system accidentally stopped / Tepco “can restart in 1 hour” → took 2 hours, reason not verified [URL] According to Tepco, the reactor6 temperature